商品評價 :
分享 :
本商品適用活動
    • 折價券
    • $77全站免運-超取常溫-平日限定 (12/29-1/1)
    • 折價券
    • $77全站免運-超取常溫-雙12年終大回饋 (12/24-1/1)

現貨Ammo Mig 保護漆 極消光/消光/半光/光澤 LUCKY VARNISH 60ml 相容AV水性漆模型漆顏料

商品編號:P0400102963092 原始貨號:P0400102963092
$ 180
預計出貨天數3
規格
  • 2053 GLOSSY光澤
  • 2050 ULTRA MATT極消光
  • 2051 MATT消光
  • 2052 SATIN半光澤
數量
  • 付款方式:
    超商取貨付款 / 線上刷卡 / ATM 轉帳
  • 運送方式:
    常溫7-ELEVEN店到店取貨付款 / 宅配

商品特色

AMIG2050極消光保護漆LUCKY VARNISH-ULTRA MATT 60ml 用於各種水性壓克力顏料的消光添加劑/清漆。保證100%平整。該清漆可以兩種不同的方式使用: -塗裝後直接從罐中用作常規清漆,以達到完全平整的效果。 -也可以將其添加到水性壓克力顏料中用作消光添加劑。 長期以來,清漆的應用一直是建模人員面臨的最大挑戰之一。由於使用質量差或不適當的清漆來完成手頭的工作,許多人毀了一些模型,但事實是,清漆過程是製造過程中極為重要的一步。 AMMO首次發布了一個完整的清漆系列,可在每種型號上贏得大獎。 這些水性壓克力清漆將使您以非常簡單的方式使用刷子和噴槍獲得最佳效果。它必須薄薄地使用,並且可以直接從廣口瓶中塗抹而無需稀釋以獲得完美的表面效果。當通過噴槍使用時,建議從表面噴塗6英寸(15厘米)。它無毒無味,可在24小時內完全乾燥。 經過長時間的精心開發,新的清漆系列可確保建模者每次都能獲得完美的結果。不要碰碰運氣,請使用LUCKY VARNISH,這是一款獲獎產品,它可以消除使用普通清漆時可能發生的任何不適情況。可用於比例模型中所有常用的面漆,從高光澤到平整。 易於使用且易於清潔。適用於所有型號的令人難以置信的透明飾面,並且適用於所有主題。不會發黃或改變顏色。 適用於刷子和噴槍。 1-使用噴槍,在1.2 bar(17psi)的氣壓下進行短距離的輕塗,以免積聚。 2-讓兩層之間至少乾燥5分鐘。不要淹沒表面。 3-讓其完全乾燥12小時。 無需稀釋。用A.MIG-2000或水清洗 Flat medium/varnish for all kinds of acrylic paints. Guarantees 100% flat finishes. This varnish can be used in two different ways: - used straight from the jar as a regular varnish after painting to achieve a dead flat finish. - it can also be used as a flat medium by adding it to acrylic paints. Varnish application has long been one of the biggest challenges for modelers. Many have ruined a few models due to the use of poor quality or inappropriate varnishes for the job at hand, and the thing is that the varnishing process is an extremely important step of the build. For the first time, AMMO releases a complete varnish range for winning results on each and every model. These acrylic varnishes will allow you to get the best results with both brush and airbrush in a very simple manner. It must be used in thin layers, and can be applied directly from the jar without thinning for a perfect finish. When used through the airbrush, we recommend spraying 6 inches (15 cm) away from the surface. It is non-toxic and odorless, and dries completely in 24 hours. This new varnish range was carefully developed over a lengthy period to ensure the modeler a perfect result every time. Don´t take your chances, use LUCKY VARNISH, a winning product that will rule out any mishap that may occur when using ordinary varnishes. Available in all the usual finishes used in scale modeling, from high gloss to dead flat. Easy to use and simple to clean. Incredible transparent finishes for all of your models, and accurate for all subjects. Will not yellow or alter colors. Perfect for both brush and airbrush. 1- Using an airbrush, apply in light and short passes using 1.2 bar (17psi) air pressure, avoiding build up. 2- Let dry at least 5 minutes between coats. Do NOT flood the surface. 3- Let it dry completely for 12 hours. No thinning needed. Clean with A.MIG-2000 or water
敲敲話
敲敲話